The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively, the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used to monitor a second battery, for midpoint monitoring, or to connect a temperature sensor.
Differences compared to BMV712 Battery Monitor
- No programmable visual and audible alarm.
- No programmable relay.
|SmartShunt||500A / 1000A / 2000A|
|Supply voltage range||6,5 – 70 VDC|
|Current draw||< 1mA|
|Input voltage range, auxiliary battery||6,5 – 70 VDC|
|Battery capacity (Ah)||1 – 9999 Ah|
|Operating temperature range||-40 +50°C (-40 – 120°F)|
|Measures voltage of second battery, or temperature, or midpoint||Yes|
|Temperature measurement range||-20 +50°C|
|VE.Direct communication port||Yes|
|RESOLUTION & ACCURACY|
|Amp hours|| ± 0,1 Ah/td>|
|State of charge (0 – 100%)||± 0,1%|
|Temperature (if optional temperature sensor connected)||± 1°C/°F (0 – 50°C or 30 – 120°F)|
|Accuracy of current measurement||± 0,4%|
|Offset||Less than 20 / 40 / 80 mA|
|Accuracy of voltage measurement||± 0,3%|
|INSTALLATION & DIMENSIONS|
|Dimensions (h x w x d)|| 500A: 46 x 120 x 54 mm
1000A: 68 x 120 x 54 mm
2000A: 68 x 120 x 76 mm
|Emission / Immunity|| EN-IEC 61000-6-1 EN-IEC 61000-6-2
|Cables (included)|| Two cables with 1A fuse, for ‘+’ connection
and starter battery or midpoint connection
|Temperature sensor||Optional (ASS000100000)|