Description
Blue Smart Charger
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
Blue Smart IP65 Charger | 12 V 4/5/7/10/15/25 A | 24 V 5/8/13 A |
---|---|---|
Input voltage | 230 VAC | |
Efficiency | 94% | 95% |
Standby power consumption | 0,5 W | |
Minimum battery voltage | Starts charging from down to 0V | |
Charge voltage ‘absorption’ | Normal: 14,4 V High: 14,7 V Li-ion: 14,2 V |
Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V |
Charge voltage ‘float’ | Normal: 13,8 V High: 13,8 V Li-ion: 13,5 V |
Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V |
Charge voltage ‘storage’ | Normal: 13,2 V High: 13,2 V Li-ion: 13,5 V |
Normal: 26,4 V High: 26,4 V Li-ion: 27,0 V |
Charge current | 4 / 5 / 7 / 10 / 15 / 25 A | 5 / 8 / 13 A |
Low current mode | 2 / 2 / 2 / 3 / 4 / 10 A | 2 / 3 / 4 A |
Temperature compensation (lead-acid batteries only) |
16 mV/ºC | 32 mV/ºC |
Can be used as power supply | Yes | |
Back current drain | 0,7 Ah/month (1 mA) | |
Protection | Reverse polarity Output short circuit Over temperature |
|
Operating temp. range | -40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature) |
|
Humidity (non-condensing) | Max 95% | |
ENCLOSURE | ||
Battery-connection | Black and red cable of 1,5 meter | |
230 V AC-connection | Cable of 1,5 meter with CEE 7/7, BS 1363 plug (UK) or AS/NZS 3112 plug |
|
Protection category | IP65 (splash and dust proof) | |
Weight | IP65 12V 25A 24V 13A: 1,9kg Other: 0,9kg |
|
Dimensions (h x w x d) | IP65s 12V 4/5A : 45x81x182mm IP65 12V 7A 24V 5A: 47x95x190mm IP65 12V 10/15A 24V 8A: 60x105x190mm IP65 12V 25A 24V 13A: 75x140x240mm |
|
STANDARDS | ||
Safety | EN 60335-1, EN 60335-2-29 | |
Emission | EN 55014-1, EN 61000-6-3, EN 61000-3-2 | |
Immunity | EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |