Victron EasySolar 3 kVA & 5 kVA with Color Control panel


Victron EasySolar 3 kVA & 5 kVA with Color Control panelThe all-in-one solar power solution
The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure.
The product is easy to install, with a minimum of wiring.

Color Control panel
Two outstanding functions:
– Prioritizes battery charging by the MPPT charge controller
– Connects to the internet, enabling remote monitoring (VRM website) and remote control.

AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers.
An additional 16A output is controlled by the AC input: it will switch on only when AC is available.

Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.

Unique solar application software
Several software programs (Assistants) are available to configure the system for various grid-interactive or stand-alone applications.
Please see


EasySolar EasySolar 24/3000/70-50
EasySolar 48/3000/35-50
EasySolar 48/5000/70-100
Transfer switch 50A 50A 50A
Input voltage range 19 – 33V 38 – 66V 38 – 66V
‘Heavy duty’ output AC 2 16 A
Output AC 1a, 1b, 1c, 1d Output voltage: 230VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3) 3000VA / 2400W 3000VA / 2400W 5000VA / 4000W
Cont. output power at 40°C 2200W 2200W 3700W
Cont. output power at 65°C 1700W 1700W 3000W
Peak power 6000W 6000W 10000W
Maximum efficiency 94% 95% 95%
Zero load power 20W 25W 35W
Zero load power in search mode 10W 12W 15W
AC Input Input voltage range: 187-265 VAC
Input frequency: 45 – 65 Hz Power factor: 1
Charge voltage ‘absorption’ 28,8V 57,6V 57,6V
Charge voltage ‘float’ 27,6V 55,2V 55,2V
Storage mode 26,4V 52,8V 52,8V
Charge current 70A 35A 70A
Battery temperature sensor yes
Programmable relay (5) yes
Protection (2) a – g
Model MPPT 150/70-MC4 MPPT 150/70-MC4 MPPT 150/100-MC4
Maximum output current (4) 70A 70A 100A
Maximum PV power 2000W 4000W 5800W
Maximum PV open circuit voltage 150V
Maximum efficiency 98%
Self-consumption 10mA
Charge voltage ‘absorption’, default setting 28,8V 57,6V 57,6V
Charge voltage ‘float’, default setting 27,6V 55,2V 55,2V
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C -32 mV / °C -64 mV / °C
Protection a – g
Operating temp. range -40 to +65°C (fan assisted cooling)
Humidity (non-condensing): max 95%
Material & Colour aluminium (blue RAL 5012)
Protection category IP 21
Battery-connection Four M8 bolts (2 plus and 2 minus connections)
PV connection Two sets of MC4 PV connectors. Three sets of MC4
PV connectors
230 V AC-connection Screw terminals 13 mm2 (6 AWG)
Weight 28kg 28kg 48kg
Dimensions (hxwxd) 810 x 258 x 218 810 x 258 x 218 877 x 328 x 241
Safety EN 60335-1, EN 60335-2-29, EN 62109-1
Emission / Immunity EN 55014-1, EN 55014-2, EN 61000-3-3, EN 61000-6-3, EN 61000-6-2, EN 61000-6-1
1) Can be adjusted to 60Hz and to 240V
2) Protection:
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230 VAC on inverter output
g. Input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Programmable relay which can be set for general alarm, DC under
voltage or genset start signal function

Victron EasySolar 3 kVA & 5 kVA with Color Control panel